Wednesday, 24. April 2024

Poster

P1
Enhancing the Photon Flux with Helical CT
B. Illerhaus, A.-C. Paschold, BAM, Berlin, Germany
Poster
P2
Comparison of Crack Detection Methods for Analyzing Damage Processes in Concrete with Computed Tomography
K. Ehrig, J. Goebbels, D. Meinel, BAM, Berlin, Germany
O. Paetsch, S. Prohaska, V. Zobel, Zuse-Institut Berlin (ZIB), Germany
Manuscript
P3
Automatic X-ray Inspection with Dynamic Reference Data Sets
T. Stocker, T. Wenzel, Fraunhofer IIS, Fürth, Germany
Abstract + Poster
P4
Modelling Computed Radiography Detectors with a Cascaded Linear System Model
A. Schumm, EDF R&D, Clamart, France
P. Hugonnard, F. Mathy, J. Tabary, CEA-LETI, Grenoble, France
Manuscript
P5
Simulation Aided Study for Optimising Industrial X-ray CT Scan Parameters for Non-Destructive Testing and Materials Characterisation
M. Reiter, Upper Austria University of Applied Sciences, Wels, Austria
C. Kuhn, Carl Zeiss Industrielle Messtechnik, Oberkochen, Germany
C. Gusenbauer, B. Harrer, C. Heinzl, J. Kastner, D. Salaberger, Upper Austria University of Applied Sciences, Wels, Austria
Manuscript
P6
Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography
C. Heinzl, J. Kastner, M. Reiter, Upper Austria University of Applied Sciences, Wels, Austria
A. Amirkhanov, E. Gröller, Vienna University of Technology, Wien, Austria
Manuscript
P7
Compensation of Scintillator Sensitivity Loss due to Irradiation Damage
F. Guillet, CEA, DAM, Monts, France
P. Mercier, C. Thiery, CEA, DAM, Arpajon, France
E. Lahalle, L. Marti, C. Moisan-Thooris, Supélec, Gif-sur-Yvette, France
Manuscript
P9
Nondestructive Inspection of Metal Coated Plasma-Facing Composite Materials by X-ray Laminography
I. Tiseanu, National Institute for Laser, Plasma and Radiation Physics, Bucharest, Romania
M. Iovea, Accent Pro 2000, Bucharest, Romania
T. Craciunescu, C. Dobrea, C. Ruset, A. Sima, National Institute for Laser, Plasma and Radiation Physics, Bucharest, Romania
without Manuscript
P10
Quality Control of High Tension 3D-NVEB-Weld Joints
M. Diebel, F.-W. Bach, J. Hauer, W. Reimche, Leibniz University Hanover, Garbsen, Germany
Manuscript
P11
Linearity of Flat Panel X-ray Detectors and Comparison of Non-Linear Correction Algorithms
T. Hofmann, I. Bauscher, J. Claußen, N. Uhlmann, Fraunhofer EZRT, Fürth, Germany
F. Nachtrab, Fraunhofer EZRT, Fürth, Germany and Friedrich-Alexander Univ. Erlangen-Nürnberg, Germany
Manuscript
P12
Parameter Dependent Thresholding for Dimensional X-ray Computed Tomography
K. Kiekens, W. Dewulf, Y. Tan, Group T - Leuven Engineering College, Leuven, Belgium
J.-P. Kruth, Katholieke Universiteit Leuven, Heverlee, Belgium
A. Voet, Lessius Mechelen, Sint-Katelijne-Waver, Belgium
Manuscript
P13
Basis Material Decomposition - a Quantitative X-ray Imaging Method and its Application in Industrial Sorting
J. Mühlbauer, M. Firsching, Fraunhofer EZRT, Fürth, Germany
F. Nachtrab, Fraunhofer EZRT, Fürth, Germany and Friedrich-Alexander Univ. Erlangen-Nürnberg, Germany
A. Jobst, Fraunhofer IIS, Erlangen, Germany
Manuscript
P14
Limited View Tomography of Wood with Fast and Thermal Neutrons
K. Osterloh, U. Ewert, D. Fratzscher, M. Jechow, U. Zscherpel, BAM, Berlin, Germany
A. Hasenstab, Ingenieurbüro Dr. Hasenstab, Augsburg, Germany
T. Bücherl, B. Schillinger, TU München, Garching, Germany
Manuscript
P16
Material Identification Methods in Spectral Radiography Using CdTe Semiconductor Detectors
V. Rebuffel, G. Beldjoudi, A. Brambilla, J. Rinkel, CEA-LETI, Grenoble, France
Manuscript
P17
Simulation of Complex Scan Paths for 3D Reconstruction
C. Bellon, U. Ewert, D. Fratzscher, C. Gollwitzer, G.-R. Jaenisch, BAM, Berlin, Germany
Manuscript
P18
Feature-Preserving CT Data Reduction Method Based on Elastic Volume Deformation
S. Kang, D. Kim, H. Park, Y. Shin, Seoul National University, South Korea
without Manuscript
P19
Quantitative Dimension Measurement of Laser Target Components Using Hamamatsu Microfocus Source
A. Choux, G. Geoffray, C. Hermerel, L. Jeannot, O. Legaie, CEA, Is sur Tille, France
without Manuscript
P20
A Framework for Defective Cells Detection on a X-ray Detector Based on 3D Cone-Beam CT
D. Kim, Seoul National University, South Korea
S. Jang, K. Kim, J. Yoon, 3D Industrial Imaging, Seoul, South Korea
Y. Shin, Seoul National University, South Korea
Manuscript
P21
Single Crystal Scintillator Plates Used in Micro-CT Application
J. Tous, Crytur, Turnov, Czech Republic
J. Mares, M. Nikl, Academy of Sciences of the Czech Republic, Institute of Physics, Prague, Czech Republic
K. Blazek, P. Horodysky, Crytur, Turnov, Czech Republic
Manuscript
P22
X-ray Measurement of Cluster Velocity and Acceleration in the Near Wall Region
F. Meng, W. Wang, J. Li, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China
Abstract + Poster
P23
Dependence of Signal-to-Noise Ratio on Radiation Energy and Grey Value in Digital Industrial Radiology
M. Jechow, U. Ewert, B. Redmer, U. Zscherpel, BAM, Berlin, Germany
Abstract + Poster
P24
Correction of Diffuse X-ray Detector Based Background
A. Lange, M.P. Hentschel, A. Kupsch, B.R. Müller, BAM, Berlin, Germany
Manuscript
P25
A Defect Grading Method for Digital Radiographic Image
C. Sun, Q. Li, G. Tang, Z. Wang, China Academy of Engineering Physics, Mianyang, China
Manuscript
P26
A Gantry Based Micro-CT Scanner for Material Research
M. Dierick, M. Boone, B. Masschaele, L. Van Hoorebeke, D. Van Loo, Ghent University, Belgium
without Manuscript
P27
A Modular Multi-Resolution X-ray CT Setup for Multi-Scale Imaging
D. Van Loo, M. Boone, M. Dierick, P. Jacobs, B. Masschaele, J. Van Acker, J. Van den Bulcke, L. Van Hoorebeke, D. Vansteenkiste, Ghent University, Belgium
without Manuscript
P28
Morpho+: a Software Package for the Three-Dimensional Analysis of X-ray Computed Tomography Data
J. Vlassenbroeck, inCT, Gent, Belgium
M. Boone, L. Brabant, V. Cnudde, J. Dewanckele, L. Van Hoorebeke, Ghent University, Belgium
Abstract
P29
Scattered Radiation Grids for Micro Computed Tomography
B. Illerhaus, BAM, Berlin, Germany
S. Arnold, PerkinElmer Technologies, Walluf, Germany
Manuscript
P30
Computed Tomography Image Processing - Automated Analysis on GFRP Helicopter Rotor Blades
B. Diewel, R. Oster, Eurocopter Deutschland, München, Germany
T. Dierig, T. Günther, Volume Graphics, Heidelberg, Germany
Abstract + Poster
P31
Computerized Tomography for Huge Objects from Aerospace Industry
S. Oeckl, Fraunhofer IIS, Fürth, Germany
without Manuscript
P33
Evaluation of Welded Shipbuilding Steel Plates with a Compact Computed Radiographic System
A.H. Shinohara, E. Lundgren, UFPE, Recife, Brazil
S. Estefen, UFRJ, Rio de Janeiro, Brazil
without Manuscript
P34
Injections of Insulin in Pig Tissue Visualized by µCT
M. Thomsen, The Niels Bohr Institute, Univ. of Copenhagen, Denmark
B. Eyving, M. Poulsen, Novo Nordisk, Hilleroed, Denmark
R. Feidenhans'l, The Niels Bohr Institute, Univ. of Copenhagen, Denmark
Manuscript